Electricity Innovations

Electricity Innovations




already though the modern electric utility industry didn’t begin until the late 1800s, we have been fascinated by electricity since our ancestors first witnessed lightning. The ancient Greeks discovered that rubbing amber produced an electric charge. Electricity is a basic part of character and it is one of our most widely used forms of energy. It is a secondary energy source that we get from the conversion of dominant supplies such as natural gas, oil, coal and nuclear strength. Many cities and towns were built alongside waterfalls that turned water wheels to perform work. Before the beginning of the electricity generation, kerosene lamps lit houses, iceboxes were used to keep food cold, and rooms were warmed by stoves. The “necessities” of today such as light bulbs, fans, air conditioners and refrigerators grow out of the ideas of inventors that lived over 100 years ago. Many of us are familiar with Benjamin Franklin’s famous kite experiment and Thomas Edison’s electrical light bulb, but there were many other inventors that contributed greatly to our modern uses of electricity. Some of these inventors simply sought to enhance upon old ideas and others saw a need and let their curiosity run wild with each experiment until they discovered something new. Each invention paved the way for the next.

In the mid-1600s Otto von Guericke, a German physicist, started experimenting with generating electricity. In 1670 he invented the first machine to produce electricity in large amounts using a ball of sulfur which he rotated and he held his hand against the ball, charging it with electricity. Others, such as Isaac Newton, later used this machine using a ball of glass instead of sulfur, and then later a cylinder, and then a glass plate.

In 1747 Benjamin Franklin started to experiment with electricity and hypothesizedv the concept of positive and negative charge. He performed his famous kite experiment to prove that lightning was a form of electrical release in 1752. During a thunderstorm he flew a kite with a stiff wire pointing up attached to the top of the kite and a meaningful tied to the other end of the string, and let it hang close to a jar. The string became wet from the rain and caused sparks to jump from the meaningful into the jar until the jar could not manager any more charges. This experiment proved that electricity and lightning are one in the same and that pointed rods conduct electricity better than balls, leading to Franklin’s invention of the lightning rod. Beginning with this experiment, the principles of electricity little by little became understood.

In 1800 an Italian professor, Alessandro Volta, invented the voltaic pile which is now called an electric cell or battery. He made a stack of disks of zinc, acid or salt-soaked paper and copper, and when he touched both ends he received a shock. The volt is named after Volta. Another, who in the first half of the 1800s contributed greatly to our modern uses of electricity, was Michael Faraday. He performed experiments on electricity and magnetism which led to modern inventions such as the motor, generator, telegraph and telephone. In 1831 he experimented with induction and discovered a way to generate a lot of electricity at once. We use his rule of electromagnetic induction for generating electricity today in electric utility plants.

In the mid 1800s, the invention of the electric light bulb changed everyone’s life. This invention used electricity to bring indoor lighting to our homes. Thomas Edison, an American inventor, didn’t invent the light bulb, but improved upon a 50-year-old idea and invented an incandescent light bulb. Many people before him had developed forms of electric lighting, but none of these were functional for home use. In 1879, after experimenting for a year and a half, he used lower current electricity, a filament of carbonized sewing thread, and an improved vacuum inside the globe to produce a functional, electrical light bulb. Edison demonstrated his incandescent lighting system for the public as he electrically lit the Menlo Park laboratory complicate. He realized the need for an electrical dispensing system to provide strength for lighting and in 1882 the first central commercial incandescent electric generating stop provided light and electric strength to customers in one square mile area in New York City. This was the beginning of the electric age as the industry was evolving from gas and electric carbon-arc commercial and street lighting systems. By the late 1880s the need for electric motors brought the industry to 24-hour service and the electricity need for transportation and industry needs was dramatically increased. Many U.S. cities now had small central stations, however each was limited to an area of just a few blocks because of the transmission inefficiencies of direct current (DC). As electricity spread around the world, Edison’s various electric companies continued to expand until they joined to form Edison General Electric in 1889. Three years later Edison General Electric merged with its leading competitor Thompson-Houston and the company became simply General Electric.

One of Thomas Edison’s main rivals was George Westinghouse Jr., a pioneer of the electrical industry. In 1886 he established Westinghouse Electric and Manufacturing Company to pursue the technology of alternating current (AC). An alternating current strength system allowed voltages to be “stepped up” by a transformer for dispensing, which reduced strength losses, and then “stepped down” by a transformer for consumer use. He thought that Edison’s strength network based on low-voltage direct current was too inefficient to be scaled up to a large size. In 1885 Westinghouse purchased strength transformers developed by Lucien Gaulard and John Dixon Gibbs. Transformers were not a new invention, however this design was one of the first that was able to manager large amounts of strength, however was nevertheless easily manufactured. Using these transformers and a Siemens alternating current generator, he began experimenting with alternating current networks. Westinghouse worked to perfect the transformer design and build a functional alternating current strength network with the help of William Stanley and Franklin Leonard Pope. In 1886 Westinghouse and Stanley installed the first multiple-voltage alternating current strength system. The network was pushed by a hydropower generator that produced 500 volts. The voltage was stepped up to 3,000 volts for dispensing, and then stepped back down to 100 volts to strength electric lights. This device made it possible to spread electric service over a wide area and allowed for the availability of alternating current at different voltages, forming the basis of modern electrical strength dispensing. Over the next year 30 more alternating current lighting systems were installed, but the method was limited because they lacked an efficient metering system and an alternating current electric motor. In 1888, Westinghouse and his engineer Oliver Shallenberger produced a strength meter that would be more effective and the same basic meter technology remains in use today.

Nikola Tesla was one of the most important contributors to the birth of commercial electricity. He was originally an employee of Thomas Edison’s and he invented a system that transmitted alternating current, as opposed to Edison’s direct current system. Edison opposed Tesla’s idea, so Tesla set up his own laboratory and announced his invention of the first functional alternating current induction motor and polyphase strength transmission system in 1888. The polyphase system would allow transmission of alternating current electricity over long distances. Westinghouse asked Nikola Tesla to join his electric company where Tesla continued his work on the alternating current induction motor and Westinghouse acquired exclusive rights to Tesla’s polyphase system patent. All of our electric motors today run on principles set out by Tesla, such as the motor that produces high frequency signals that are used in radios and TVs. He also set the standard for the frequency of the transmission current, 60 hertz, which we nevertheless function at today.

Westinghouse and Edison feuded over the dispensing of alternating current strength and direct current strength. Edison used only direct current because he thought that alternating current was dangerous, but Westinghouse thought the risks could be controlled and were outweighed by the advantages. already General Electric ultimately switched to alternating current. In 1893 the Westinghouse Company won the contract to set up an alternating current network to light the World’s Columbian Exposition in Chicago and later to set up the first long-range strength network using three giant alternating current generators to harness the energy of Niagara Falls into electrical energy for dispensing 25 miles away.

Now over 100 years later, think about how much we use and rely on electricity every day to meet what we consider to be our “basic needs” such as alarm clocks, traffic lights, computers and TVs. When we walk into a dark room and flip the light switch, we expect moment light. It’s interesting to think this was once only a daydream and it took many inventors to make it a reality.




leave your comment

Search

Top