Assembling an Emerson Ceiling Fan

Assembling an Emerson Ceiling Fan

An Emerson ceiling fan is a lasting and efficient fan, being manufactured by one of the leading companies in fan design and technology. The company was responsible in producing the very first electric motor that operates on AC current. It was the start of the Emerson’s hundreds of years of dedicated service. The fans are easy to install and you can do it yourself by following these easy instructions.

Things You’ll Need

1 Stepladder

1 pc of electric tape

2 screwdrivers

1 utility knife

Wire nuts (provided by the manufacturer)


Step 1 – Assemble the Fan

Using the manufacturer’s manual, assemble the Emerson fan without attaching the globes, lighting and blades.

Step 2 – Install the Fan

With the main breaker off, install the fan by attaching it to the ceiling using the bolts. obtain safely and securely.

Step 3 – Prepare the Bracket

Separate the wires in the bracket by inserting the down rod’s hanger ball into the bracket by lowering the ball into the bracket cradle.

Step 4 – Connect the Wires

The green grounding wire from the hanger bracket is connected to the ground wire of similar color. The copper grounding wire is connected to the wire nut provided. The white wire should also be connected with the white wire from the ceiling outer box. This procedure is also done with the black and blue wire coming from the down rod. Make use of provided wire nuts by the Emerson ceiling fan.

Step 5 – Complete the Connection

Finally connect the blue wire from the down rod to the red wire from the outlet box from the ceiling.

Step 6- Wrap the Wires with Electric Tapes

Double check the wires and tighten the wire nuts securely to ensure proper connection, then wrap each wire carefully with electric tape. Press gently the connected wires into the outer box of the ceiling.

Step 7 – Insert the Studs

Using the tapped holes in the hanger bracket, place the threaded studs into it. The Emerson ceiling fan manual will show you the studs if you cannot find them.

Step 8 – Install the Ceiling Cover

obtain and tighten the ceiling cover snugly into the ceiling by using the two knobs. The cover must be lifted up the down rod and the hanger bracket with the threaded studs projecting by the cover’s holes.

Step 9 – Install the Rest

You can now add the globes, fan blades and the light bulbs by following the manuals instructions.

Step 10 – Restore the strength

Turn on the main breaker and test your newly installed ceiling fan.

You can double check your set-up before turning on the strength. If you have doubts, then call in an electrician to check the set-up of the Emerson fan for you. It pays to be careful when it comes to electrical appliances.

leave your comment